21K T14 PTFE Lined Tank Container, ISO PTFE Tank Container for Chemical, Un Portable Tank T14

21K T14 PTFE Lined Tank Container,ISO PTFE Tank Container for chemical,
UN Portable Tank T14 wth PTFE Lining.
T14 Acid Tank Container, Sulfuric Acid Tank Containers,ISO Sulphuric Acid Tank,ISO Sulphuric Acid Tank,20FT Chemical Tank Container,40FT Chemical Tank Container,20FT PE Lined Sulfuric Acid Tank Containers,98% Sulphuric Acid Tank Container,98% Oil of Vitriol Tank Container,20FT Vitriolic Acid Chemical Tank Container.

Hubei Dong Runze Special Vehicle Equipment Co., Ltd is the only T14 HCL ISO Tank Container manufacturer in China to have Prototype approved and fully certified UN T14 ISO Tank Container for storage and transport of Hazardous chemicals in any country in the world for Road, Rail and Marine operations. Dong Runze T14 ISO tank containers are Type tested as per ISO 1496-3 and are certified by authorized classification body with ASME,IMDG,TIR,UIC,CSC,TC.RID/ADR,US DOT.
Dong Runze T14 tanks are made of Carbon Steel with PE lining inner for storage and transport of Hazardous Chemicals like Hydrochloric Acid (HCL), Caustic Soda, Sulfuric Acid, Ferric Chloride etc. As an ISO Tank Containers Manufacturer in china, Dong Runze supplies T14 ISO Tank containers, which are tested as per ISO 1496-3 and are prominent with customers in Gulf and Middle East countries like UAE, Iran, Oman, Saudi Arabia, Iraq,Qatar, Kuwait, Bahrain and Asian countries like Singapore, Malaysia and Vietnam and North American countries like US and Mexico and European countries like Greece, France, Poland and Netherlands.
T14 - UN Portable ISO Tank Container Technical Specification:


1).Design code and regulation: ASME VIII DIV 1-2017ED,
T14 UN POTABLE TANK,IMDG,TIR,UIC,CSC,TC.RID/ADR,US DOT,ISO 1496-3
2).M.A.W.P: 0.4MPa at 65ºC
3).M.D.M.T: -40ºC at 0.4MPa
4).P.R.V SETTING: 0.44MPa
5).HYDROSTATIC TEST PRESSURE: 0.60MPa
6).LEAKAGE TEST:0.3MPa
7).DESIGN TEMPERATURE MAX/MIN:+65ºC/-40ºC
8).CORROSION ALLOWANCE: 0mm
9).NOMINAL THICKNESS OF SHELL: 6mm
10).THICKNESS OF HEAD:8(min 6.0)mm
11).RT(SHELL/HEAD):100% / 100%
12).MT: ALL THE NOZZLE WELDS AND ANGLE WELDS
13).SERVICE MEDIUM:UN1830 SULFURIC ACID(92%-94%)
&UN2693 SODIUM HYDROGUN SULPHITE SOLUTION

1. .TOTAL VOLUME: 17,500 L
2. .TARE WEIGHT: 5,170KG
3. .M.P.G.M: 36,000KG
4. .STACKING MASS:192,000KG
5. .CYLINDER MATERIAL:SA-516 Gr.485 NORMALIZIED
6. .HEAD MATERIAL: SA-516 Gr.485 NORMALIZIED
7. .FLANGES/WELD-IN FORGINGS:SA-350 LF2 CLASS 1
8. .FRAME-PLATE/HOLLOW SECTIONS:Q345-D(GB/T1591)
9. .INNER LINING MATERIAL: 16mm PE
10. .INSULATION:50MM MINERAL WALL
11. 
    Tank Type: 20' ISO full frame collar tank, Type UN Portable Tank T14, insulated, steam
    heated, top side rails fitted
    Quantity: units
    Frame Dimensions: 20' x 8' x 8'6"
    Capacity: 21,000 Litres (+ /- 1%)
    M.G.W.: 36,000 kg
    Tare (est.): 3,450 kg +/- 3%
    Max Payload: 32,550 kg
    Design Pressure: 4 Bar
    Test Pressure: 6 Bar
    Max. Allowable Vacuum: 0.41 Bar
    Design Temp: -40ºC to +130ºC