Anticorrosive Steel Lined Plastic PTFE, LLDPE Acid Elbow Pipe

5 0 Reviews

Tank Marerial:

Availability:

Quantity:



Inquire Add to Basket

Product Description

Anticorrosive Steel Lined Plastic PTFE ,LLDPE Pipe Use for Sulfuric Acid Hydrochloric Acid HCL, NaOH, NaCLO

Steel lined piping with tetrafluoride
Molded piping with tetrafluoride
Anticorrosive pipeline resistant to high temperature and negative pressure
Chemical pipeline

Detail Picture

01.Carefully selected seamless steel pipe

02 .Steel pipe Weld Flange and Polishing

03 .Steel pipe Sandblasting

04 .Steel pipe Lined PE

05 .Steel pipe Cooling,Primer, Topcoat Paint Anti rust

Specification	General PTFE thickness and negative pressure-resistance		The thickness of PTFE wall required to resist-0.1MPA pressure when the temperature is less than 120degree,
DN25	2mm	-0.08Mpa	3mm(L≤3000mm)
DN32	2mm	-0.075Mpa	3mm(L≤3000mm)
DN40	2.5mm	-0.075Mpa	4mm(L≤3000mm)
DN50	2.5mm	-0.06Mpa	5mm(L≤3000mm)
DN65	2.5mm	-0.05Mpa	8mm(L≤1000mm)
DN80	3mm	-0.05Mpa	10mm(L≤1000mm)
DN100	3mm	-0.04Mpa	13mm(L≤1000mm)
DN125	4mm	-0.03Mpa	13mm(L≤1000mm)
DN150	4mm	-0.025Mpa	13mm(L≤1000mm)
DN200	5mm	-0.02Mpa	15mm(L≤1000mm)

Specifications:
Nominal Diameter (mm/in. ): DN15-DN600 (NPS 1/2-NPS 24)
Operating temperature: -20-180 degree
Operating pressure: -0.09MPa-1.6MPa (-0.9bar-16bar)
Pipe: Seamless steel.
Flange: ASME B16.5 Class 150 Flange options: HG, GB, JB, JIS, BS, DIN, ANSI, ASTM
Special pieces of specific or non standard size can be manufactured on request.

Carbon steel 45/90degree ptfe lined elbow
Operating temperature: -20-180
Operating pressure: -0.09MPa-1.6MPa

Carbon steel 45/90degree ptfe lined elbow
1. Positive pressure: It shall adopt steel components according to different technical requirements, and the thickness of PTFE wall shall be over 2mm. If the temperature is less than 100 degree, the production length shall be less than 6m; And if the temperature exceeds 100 degree, the length shall be less than 3m.
2. Negative pressure: Design according to different ambient conditions of the users

PTFE lined 90° elbow									Unit mm
Nominal diameter		Specification of balled iron T	Raised face A	Central height C1	Inside diameter D1	PTFE thickness	out side diameter of flange D	Diameter of bolt circle K	Thickness of flange C
DN(mm)	NPS(inch)	Specification of balled iron T	Raised face A	Central height C1	Inside diameter D1	PTFE thickness	out side diameter of flange D	Diameter of bolt circle K	Thickness of flange C
DN15	1/2	34	40	80	15	5	90	65	11
DN20	3/4	38	45	90	18	5	100	75	11
DN25	1	42	60	92	22	5	110	85	12
DN32	1 1/4	48	70	100	28	5	130	100	13
DN40	1 1/2	57	80	112	38	5	140	110	14
DN50	2	68	95	117	48	5	155	125	14
DN65	2 1/2	89	115	135	63	8	175	145	16
DN80	3	108	130	150	78	8	190	160	16
DN100	4	114	150	150	87	8	210	180	18
DN125	5	140	180	190	110	8	240	210	20
DN150	6	168	205	230	135	10	275	240	20
DN200	8	219	260	305	180	10	330	295	20
DN250	10	273	315	380	230	12	385	350	23
DN300	12	325	365	420	280	12	435	400	23

Key words:

ptfe lined pipe fittings	ptfe lined tee	ptfe lined reducer	ptfe lined elbow	ptfe lined cross
ptfe lined pipe and fittings	ptfe lined90degree elbow	ptfe lined 45 degrdd elbow	ptfe lined ECC reducer	ptfe lined CON reducer
ptfe lined equal tee	ptfe lined reduce tee	ptfe lined unequal tee	ptfe lined pipe	ptfe lined fittings
ptfe lined carbon steel pipe fittings	ptfe lined carbon steel tee	ptfe lined carbon steel reducer	ptfe lined carbon steel elbow	ptfe lined carbon steel cross
PTFE pipe	PTFE lined pipe(Australia)	Resistant Stainless Steel Pipe	Resistant Steel Pipe	Carbon seamless steel pipe
Anti Corrosion Pipe Fittings Lined	PTFE lining fittings	PTFE lined piping	straight tee	PTFE lined bends

Anticorrosive Steel Lined Plastic PTFE, LLDPE Pipe (Three / 4 Way Elbow Pipe) Use for Sulfuric Acid Hydrochloric Acid HCl, Naoh, Naclo,

FAQ

1.Are you trading company or manufacturer ?

We are Group Corporation manufacturer ,have Group Factories Contractor.

2 .Can I have samples of this type of product to test the quality?
Yes, you can buy any sample to test the quality,our MOQ is 1 unit.

3. What's the delivery time and can you lower the price?
It depends on your order.The delivery time is within 30~120 workdays after we received your prepayment. If you have placed an order of large quantities, then,of course, the price can be lowered.

4.Can you supply some quick-wear parts?

Yes, we can supply the parts as your request,such as Manhole cover,discharge tube, hose pipe, Valves,gaskets,Botls and nuts etc.

6.Do you have any used products for sale?

We have products in stock for choices,the prices are favorable,we'll show you our stock products if you need.

7.What's the payment terms?

TT 30% as deposit, balance before shipment by TT or at sight.

8. How to guarantee customers get the goods smoothly after they payment?
Don't worry,dear.We have joined the trade assurance,you can place the order by trade assurance,if we don't delivery products, the deposit will be returned to you.

9.How can you ensure the quality of the products?

Don't worry,dear.We have joined the trade assurance,if the products have quality problems when you received them,the payments can be refund to you.