| Quantity: | |
|---|---|
Stainless ISO Tank
| TYPE | 20FT ISO tank |
| Vessel design code | IMDG etc. |
| Shell material | Stainless steel SS30408 , 316L, SANS 50028-7 WNr 1.4402/1.4404 |
| Frame material | GB/T 1591-94-Q345D |
| Frame dimensions | 6058x2438x2438,2591mm |
| Tank barrel shell thickness | 5mm |
| Head thickness | 6mm |
| Nominal capacity | 24,000L;25000L ( 5000USG -6600USG) |
| Tare weight | 4770kg(approx) |
| Working pressure | 4.0bar |
| Test pressure | 6.0bar |
| Design temperature | -40 to 130 |
| Approvals | Lloyds or BV Construction Certificate, IMDG, CSC, Need MOQ 20 ADD $2000 per tank |
| Manlid | 500mm, 8-point fastening manlid |
| Airline valve | 1.5 BSP air inlet with 1 1/2BSP connection, fitted with captive blank cap and chain. |
| Pressure relief valve | 2 1/2 BSP pressure relief valve without flameproof of gauze Set pressure: 4.4 bar |
| Bottom discharge | stainless steel foot-valve with butterfly valve and blank flange |
| Top outlet | Provision only |
| Walkway | F type walkway, |
| Insulation | Optional :50mm Rockwood with G.R.P ADD $2000 |
| Steam heating | Optional 6 longitudinal runs of heating coils, giving a total effective heating area of 7.00 M2 will be fitted. ADD $2000 |
| Handdrails | ADD $500 |
| Thermometer | 1 off dual scale ADD $200 |
ISO Tank
Steel Lined LDPE aslo for HCL(max 35%), NaOH (max 50%), NaCLO (max 10%), PAC (max 17%),H2SO4(60%,98%) ,HF ( 48%),H3PO4 (10%-85%),NH3. H2O,H2O2 (30%)
T1 ISO tank container for Wine / Juices and Light liquids
T3 ISO tank container for Petrol, Diesel, Jet Fuel, Crude Oil (ATF), Bitumen
T4 ISO tank container for Edible / Non Edible Oils
T11 ISO tank container for Non hazardous chemicals
T14 ISO tank container For Hazardous Chemicals and Acids like HCL / Caustic / sulfuric acid/ Ferric Chloride) with Rubber lining / FRP lining Inner / PE lining
T20 ISO tank container for Bromine
T50 ISO tank container for LPG / Ammonia Gas / Propane
SWAP Tank container for cargo above 28,000 Litres to 35,000 Litres
Stainless ISO Tank
| TYPE | 20FT ISO tank |
| Vessel design code | IMDG etc. |
| Shell material | Stainless steel SS30408 , 316L, SANS 50028-7 WNr 1.4402/1.4404 |
| Frame material | GB/T 1591-94-Q345D |
| Frame dimensions | 6058x2438x2438,2591mm |
| Tank barrel shell thickness | 5mm |
| Head thickness | 6mm |
| Nominal capacity | 24,000L;25000L ( 5000USG -6600USG) |
| Tare weight | 4770kg(approx) |
| Working pressure | 4.0bar |
| Test pressure | 6.0bar |
| Design temperature | -40 to 130 |
| Approvals | Lloyds or BV Construction Certificate, IMDG, CSC, Need MOQ 20 ADD $2000 per tank |
| Manlid | 500mm, 8-point fastening manlid |
| Airline valve | 1.5 BSP air inlet with 1 1/2BSP connection, fitted with captive blank cap and chain. |
| Pressure relief valve | 2 1/2 BSP pressure relief valve without flameproof of gauze Set pressure: 4.4 bar |
| Bottom discharge | stainless steel foot-valve with butterfly valve and blank flange |
| Top outlet | Provision only |
| Walkway | F type walkway, |
| Insulation | Optional :50mm Rockwood with G.R.P ADD $2000 |
| Steam heating | Optional 6 longitudinal runs of heating coils, giving a total effective heating area of 7.00 M2 will be fitted. ADD $2000 |
| Handdrails | ADD $500 |
| Thermometer | 1 off dual scale ADD $200 |
ISO Tank
Steel Lined LDPE aslo for HCL(max 35%), NaOH (max 50%), NaCLO (max 10%), PAC (max 17%),H2SO4(60%,98%) ,HF ( 48%),H3PO4 (10%-85%),NH3. H2O,H2O2 (30%)
T1 ISO tank container for Wine / Juices and Light liquids
T3 ISO tank container for Petrol, Diesel, Jet Fuel, Crude Oil (ATF), Bitumen
T4 ISO tank container for Edible / Non Edible Oils
T11 ISO tank container for Non hazardous chemicals
T14 ISO tank container For Hazardous Chemicals and Acids like HCL / Caustic / sulfuric acid/ Ferric Chloride) with Rubber lining / FRP lining Inner / PE lining
T20 ISO tank container for Bromine
T50 ISO tank container for LPG / Ammonia Gas / Propane
SWAP Tank container for cargo above 28,000 Litres to 35,000 Litres
