| Quantity: | |
|---|---|
20Feet CCS Aproved Offshore ISO TANK For Bulk Cement
T1 ISO tank container for Wine / Juices and Light liquids
T3 ISO tank container for Petrol, Diesel, Jet Fuel, Crude Oil (ATF), Bitumen
T4 ISO tank container for Edible / Non Edible Oils
T11 ISO tank container for Non hazardous chemicals
T14 ISO tank container For Hazardous Chemicals and Acids like HCL / Caustic / sulfuric acid/ Ferric Chloride) with Rubber lining / FRP lining Inner / PE lining
T20 ISO tank container for Bromine
T50 ISO tank container for LPG / Ammonia Gas / Propane
SWAP Tank container for cargo above 28,000 Litres to 35,000 Litres
| Tank container main Technical Parameters | |||||
| 20FT tankcontainer | 30FT tank container | 40FT tank container | |||
| Overall dimension(mm) | 6058×2438×2438/2591 | 9144×2438×2438/2591 | 12192×2438×2438/2591 | ||
| Working temperature(ºC) | -12C-50C | ||||
40FT 20FT 22.5/29/29.5cbm ISO Shipping Bulk Coal/Cement/Plaster/ZnO/Znic Powder Steel Portable Storage Bulker Cargo Tank Container
20FT 22.5cbm ISO Bulk Coal/Cement Powder Tank Container
20FT 22.5cbm ISO Bulk Coal/Cement Powder Tank Container
| Dimension of the 20FT Bulk Cement Powder Tank Container without Diesel Engine and Air Compressor | ||
| Items | Unit | Parameter |
| External dimension(LxWxH) | mm | 20' X 8' X 9' 6" |
| Internal size of tank | mm | 6000 x 2400 |
| Tank volume | m³ | 20 -- 26 |
| Load capacity | m³ | 21.5 |
| Design pressure | Mpa | 0.2 |
| Test pressure | Mpa | 0.3 |
| Design temperature | ºC | 0 to +70 |
| Max. gross weight | kg | 30480 |
| Tare weight | kg | 4,080 (estmated) |
| Loading weight | kg | 26400 |
| Stacking weight.(For 1.8g) | kg | 192000 |
| Discharge rating | t/min | cement: 1.0 ~ 1.3 |
| Remnant ratio | kg | cement: about 100kg |
| Materials | ||
| 3.1 Main materials usde for the container shall be of the best quality conforming to the requirements of this specification society. | ||
| 3.2 Materials of the main parts | ||
| Tank ahell Dish ends | Q345B -GB/T 15912008 Yield Point: 35kg/mm2 Tensile Strength: 50kg/mm2 | |
| Walk way Internals | Structural steel: SS41 Yield Point: 25kg/mm2 Tensile Strength: 41kg/mm2 | |
| Corner posts End rails Tank- to-end linkers End corner supports Tilted panels and ribs | Q345B ISO/R1161 Yield Point: 35kg/mm2 Tensile Strength:50kg/mm2 | |
| Corner fitting | Casted Weldable Steel: SCW49 Yield Point: 28kg/mm2 Tebsile Strength: 49kg/mm2 | |
| Pipe(Seamless Pipe) | 20-GB8163 Yield Point:25kg/mm2 Tensile Strength: 41kg/mm2 | |
Product Description
The functions of this series container tanker/Tank Container:
This series tank semi trailers are suitable for the transportation of Bulk Cement/Flour/Coal/Plaster/Plastic granule/Lithium Hexafluorophosphate etc. Powder Material.
The volume varies widely from 22.5 cube meters to 52 cube meters, we can manufacture it according to your needs.
Design proposal for the 20feet ISO tank container:
---Net capacity: not less than 25cubic; Shell of tank container Materials using Wisco Q235 High quality carbon steel 6mm baffle;
---Two feed inlets,bigger manhole covers, 2 NOS. pressure vent valves( breather valve) , at the end of the bottom , DN80 dump valve(discharge valve). Screw of Openings and valves adopt stainless steel screws, single coaming board on the top of tank Molybdenum red reflective tape;
---Framework is made of High quality steel, each one ladder at back and forth. With two acid resistant tube, two 4kg fire extinguishers.
| Dimension of the 20FT 26CBM Bulk Cement Powder Tank Container without Diesel Engine&Air Compressor | ||
| Items | Unit | Parameter |
| External dimension(LxWxH) | mm | 20' X 8' X 9' 6" |
| Internal size of tank | mm | 6000 x 2400 |
| Tank volume | m³ | 26 |
| Load capacity | m³ | 21.5 |
| Design pressure | Mpa | 0.2 |
| Test pressure | Mpa | 0.3 |
| Design temperature | ºC | 0 to +70 |
| Max. gross weight | kg | 30480 |
| Tare weight | kg | 4,080 (estmated) |
| Loading weight | kg | 26400 |
| Stacking weight.(For 1.8g) | kg | 192000 |
| Discharge rating | t/min | cement: 1.0 ~ 1.3 |
| Remnant ratio | kg | cement: about 100kg |
| Materials | ||
| 3.1 Main materials usde for the container shall be of the best quality conforming to the requirements of this specification society. | ||
| 3.2 Materials of the main parts | ||
| Tank ahell Dish ends | Q345B -GB/T 15912008 Yield Point: 35kg/mm2 Tensile Strength: 50kg/mm2 | |
| Walk way Internals | Structural steel: SS41 Yield Point: 25kg/mm2 Tensile Strength: 41kg/mm2 | |
| Corner posts End rails Tank- to-end linkers End corner supports Tilted panels and ribs | Q345B ISO/R1161 Yield Point: 35kg/mm2 Tensile Strength:50kg/mm2 | |
| Corner fitting | Casted Weldable Steel: SCW49 Yield Point: 28kg/mm2 Tebsile Strength: 49kg/mm2 | |
| Pipe(Seamless Pipe) | 20-GB8163 Yield Point:25kg/mm2 Tensile Strength: 41kg/mm2 | |
Product Description
The functions of this series container tanker/Tank Container:
******This series tank semi trailers are suitable for the transportation of Bulk Cement/Flour/Coal/Plaster/Plastic granule/Lithium Hexafluorophosphate etc. Powder Material.
*** The volume varies widely from 22.5 cube meters to 52 cube meters, we can manufacture it according to your needs.
Design proposal for the 20feet ISO tank container:
---Net capacity: not less than 25cubic; Shell of tank container Materials using Wisco Q235 High quality carbon steel 6mm baffle;
---Two feed inlets,bigger manhole covers, 2 NOS. pressure vent valves( breather valve) , at the end of the bottom , DN80 dump valve(discharge valve). Screw of Openings and valves adopt stainless steel screws, single coaming board on the top of tank Molybdenum red reflective tape;
---Framework is made of High quality steel, each one ladder at back and forth. With two acid resistant tube, two 4kg fire extinguishers.
20feet 29.5 Tanker Container Plaster Powder Tank Container for Sale
| Dimension of the 20FT 29.5CBM Plaster Powder Tank Container | |
| Description and Specification of Commodity | |
| Loading Capacity | 29500L |
| Overall Size/mm | 6058*2438*2591 |
| Tare | 4500 KG |
| Air Source pressure | 0.8~1.0Bar |
| Minimum Loading Weight | 27800kgs |
| Shell Material | Shell Mild Steel Q345B,5.0mm shell,5.0 mm dish ends |
| Desity of the Plaster Powder | 1.0-1.1tons/CBM |
| Standard fitting | |
| Manhole | 520mm diameter 6 point fixing,2pcs.1 pc of 2inches' vent on the top of the tank |
| Compartment | Single Compartment |
| Strengthen Ribbers | Both sides and ends. |
| Tail Structure | Equipped with 6" butterfly valve and quick connector,and also equipped with inlet help-flowing fluidizer;Equipped with air inlet tube and air inlet quick connector;Equipped with pressure gauge and safety valve. |
| Ladder | Located on the left side of the tail with ladder. |
| Walkway on the top | 400mm walkway,one vertical one,three Horizontal ones; |
| Remark: | The frame of this Tank container is very strong. |
The functions of this series container tanker/Tank Container:
******This series tank semi trailers are suitable for the transportation of Bulk Cement/Flour/Coal/Plaster/Plastic granule/Lithium Hexafluorophosphate etc. Powder Material.
*** The volume varies widely from 22.5 cube meters to 52 cube meters, we can manufacture it according to your needs.
Design proposal for the 20feet ISO tank container:
---Net capacity: not less than 25cubic; Shell of tank container Materials using Wisco Q235 High quality carbon steel 6mm baffle;
---Two feed inlets,bigger manhole covers, 2 NOS. pressure vent valves( breather valve) , at the end of the bottom , DN80 dump valve(discharge valve). Screw of Openings and valves adopt stainless steel screws, single coaming board on the top of tank Molybdenum red reflective tape;
---Framework is made of High quality steel, each one ladder at back and forth. With two acid resistant tube, two 4kg fire extinguishers.
10FT 20FT 40FT 45FT T75 Un Portable Cryogenic ASME LNG ISO Tank Container
20Feet CCS Aproved Offshore ISO TANK For Bulk Cement
T1 ISO tank container for Wine / Juices and Light liquids
T3 ISO tank container for Petrol, Diesel, Jet Fuel, Crude Oil (ATF), Bitumen
T4 ISO tank container for Edible / Non Edible Oils
T11 ISO tank container for Non hazardous chemicals
T14 ISO tank container For Hazardous Chemicals and Acids like HCL / Caustic / sulfuric acid/ Ferric Chloride) with Rubber lining / FRP lining Inner / PE lining
T20 ISO tank container for Bromine
T50 ISO tank container for LPG / Ammonia Gas / Propane
SWAP Tank container for cargo above 28,000 Litres to 35,000 Litres
| Tank container main Technical Parameters | |||||
| 20FT tankcontainer | 30FT tank container | 40FT tank container | |||
| Overall dimension(mm) | 6058×2438×2438/2591 | 9144×2438×2438/2591 | 12192×2438×2438/2591 | ||
| Working temperature(ºC) | -12C-50C | ||||
40FT 20FT 22.5/29/29.5cbm ISO Shipping Bulk Coal/Cement/Plaster/ZnO/Znic Powder Steel Portable Storage Bulker Cargo Tank Container
20FT 22.5cbm ISO Bulk Coal/Cement Powder Tank Container
20FT 22.5cbm ISO Bulk Coal/Cement Powder Tank Container
| Dimension of the 20FT Bulk Cement Powder Tank Container without Diesel Engine and Air Compressor | ||
| Items | Unit | Parameter |
| External dimension(LxWxH) | mm | 20' X 8' X 9' 6" |
| Internal size of tank | mm | 6000 x 2400 |
| Tank volume | m³ | 20 -- 26 |
| Load capacity | m³ | 21.5 |
| Design pressure | Mpa | 0.2 |
| Test pressure | Mpa | 0.3 |
| Design temperature | ºC | 0 to +70 |
| Max. gross weight | kg | 30480 |
| Tare weight | kg | 4,080 (estmated) |
| Loading weight | kg | 26400 |
| Stacking weight.(For 1.8g) | kg | 192000 |
| Discharge rating | t/min | cement: 1.0 ~ 1.3 |
| Remnant ratio | kg | cement: about 100kg |
| Materials | ||
| 3.1 Main materials usde for the container shall be of the best quality conforming to the requirements of this specification society. | ||
| 3.2 Materials of the main parts | ||
| Tank ahell Dish ends | Q345B -GB/T 15912008 Yield Point: 35kg/mm2 Tensile Strength: 50kg/mm2 | |
| Walk way Internals | Structural steel: SS41 Yield Point: 25kg/mm2 Tensile Strength: 41kg/mm2 | |
| Corner posts End rails Tank- to-end linkers End corner supports Tilted panels and ribs | Q345B ISO/R1161 Yield Point: 35kg/mm2 Tensile Strength:50kg/mm2 | |
| Corner fitting | Casted Weldable Steel: SCW49 Yield Point: 28kg/mm2 Tebsile Strength: 49kg/mm2 | |
| Pipe(Seamless Pipe) | 20-GB8163 Yield Point:25kg/mm2 Tensile Strength: 41kg/mm2 | |
Product Description
The functions of this series container tanker/Tank Container:
This series tank semi trailers are suitable for the transportation of Bulk Cement/Flour/Coal/Plaster/Plastic granule/Lithium Hexafluorophosphate etc. Powder Material.
The volume varies widely from 22.5 cube meters to 52 cube meters, we can manufacture it according to your needs.
Design proposal for the 20feet ISO tank container:
---Net capacity: not less than 25cubic; Shell of tank container Materials using Wisco Q235 High quality carbon steel 6mm baffle;
---Two feed inlets,bigger manhole covers, 2 NOS. pressure vent valves( breather valve) , at the end of the bottom , DN80 dump valve(discharge valve). Screw of Openings and valves adopt stainless steel screws, single coaming board on the top of tank Molybdenum red reflective tape;
---Framework is made of High quality steel, each one ladder at back and forth. With two acid resistant tube, two 4kg fire extinguishers.
| Dimension of the 20FT 26CBM Bulk Cement Powder Tank Container without Diesel Engine&Air Compressor | ||
| Items | Unit | Parameter |
| External dimension(LxWxH) | mm | 20' X 8' X 9' 6" |
| Internal size of tank | mm | 6000 x 2400 |
| Tank volume | m³ | 26 |
| Load capacity | m³ | 21.5 |
| Design pressure | Mpa | 0.2 |
| Test pressure | Mpa | 0.3 |
| Design temperature | ºC | 0 to +70 |
| Max. gross weight | kg | 30480 |
| Tare weight | kg | 4,080 (estmated) |
| Loading weight | kg | 26400 |
| Stacking weight.(For 1.8g) | kg | 192000 |
| Discharge rating | t/min | cement: 1.0 ~ 1.3 |
| Remnant ratio | kg | cement: about 100kg |
| Materials | ||
| 3.1 Main materials usde for the container shall be of the best quality conforming to the requirements of this specification society. | ||
| 3.2 Materials of the main parts | ||
| Tank ahell Dish ends | Q345B -GB/T 15912008 Yield Point: 35kg/mm2 Tensile Strength: 50kg/mm2 | |
| Walk way Internals | Structural steel: SS41 Yield Point: 25kg/mm2 Tensile Strength: 41kg/mm2 | |
| Corner posts End rails Tank- to-end linkers End corner supports Tilted panels and ribs | Q345B ISO/R1161 Yield Point: 35kg/mm2 Tensile Strength:50kg/mm2 | |
| Corner fitting | Casted Weldable Steel: SCW49 Yield Point: 28kg/mm2 Tebsile Strength: 49kg/mm2 | |
| Pipe(Seamless Pipe) | 20-GB8163 Yield Point:25kg/mm2 Tensile Strength: 41kg/mm2 | |
Product Description
The functions of this series container tanker/Tank Container:
******This series tank semi trailers are suitable for the transportation of Bulk Cement/Flour/Coal/Plaster/Plastic granule/Lithium Hexafluorophosphate etc. Powder Material.
*** The volume varies widely from 22.5 cube meters to 52 cube meters, we can manufacture it according to your needs.
Design proposal for the 20feet ISO tank container:
---Net capacity: not less than 25cubic; Shell of tank container Materials using Wisco Q235 High quality carbon steel 6mm baffle;
---Two feed inlets,bigger manhole covers, 2 NOS. pressure vent valves( breather valve) , at the end of the bottom , DN80 dump valve(discharge valve). Screw of Openings and valves adopt stainless steel screws, single coaming board on the top of tank Molybdenum red reflective tape;
---Framework is made of High quality steel, each one ladder at back and forth. With two acid resistant tube, two 4kg fire extinguishers.
20feet 29.5 Tanker Container Plaster Powder Tank Container for Sale
| Dimension of the 20FT 29.5CBM Plaster Powder Tank Container | |
| Description and Specification of Commodity | |
| Loading Capacity | 29500L |
| Overall Size/mm | 6058*2438*2591 |
| Tare | 4500 KG |
| Air Source pressure | 0.8~1.0Bar |
| Minimum Loading Weight | 27800kgs |
| Shell Material | Shell Mild Steel Q345B,5.0mm shell,5.0 mm dish ends |
| Desity of the Plaster Powder | 1.0-1.1tons/CBM |
| Standard fitting | |
| Manhole | 520mm diameter 6 point fixing,2pcs.1 pc of 2inches' vent on the top of the tank |
| Compartment | Single Compartment |
| Strengthen Ribbers | Both sides and ends. |
| Tail Structure | Equipped with 6" butterfly valve and quick connector,and also equipped with inlet help-flowing fluidizer;Equipped with air inlet tube and air inlet quick connector;Equipped with pressure gauge and safety valve. |
| Ladder | Located on the left side of the tail with ladder. |
| Walkway on the top | 400mm walkway,one vertical one,three Horizontal ones; |
| Remark: | The frame of this Tank container is very strong. |
The functions of this series container tanker/Tank Container:
******This series tank semi trailers are suitable for the transportation of Bulk Cement/Flour/Coal/Plaster/Plastic granule/Lithium Hexafluorophosphate etc. Powder Material.
*** The volume varies widely from 22.5 cube meters to 52 cube meters, we can manufacture it according to your needs.
Design proposal for the 20feet ISO tank container:
---Net capacity: not less than 25cubic; Shell of tank container Materials using Wisco Q235 High quality carbon steel 6mm baffle;
---Two feed inlets,bigger manhole covers, 2 NOS. pressure vent valves( breather valve) , at the end of the bottom , DN80 dump valve(discharge valve). Screw of Openings and valves adopt stainless steel screws, single coaming board on the top of tank Molybdenum red reflective tape;
---Framework is made of High quality steel, each one ladder at back and forth. With two acid resistant tube, two 4kg fire extinguishers.
10FT 20FT 40FT 45FT T75 Un Portable Cryogenic ASME LNG ISO Tank Container
