| Quantity: | |
|---|---|
Customizing LLDPE PTFE Lined F46 Steel Pipe with Chemical Discharge Valves
Anticorrosive Steel Lined Plastic PTFE ,LLDPE Pipe Use for Sulfuric Acid Hydrochloric Acid HCL, NaOH, NaCLO,
Steel lined piping with tetrafluoride
Molded piping with tetrafluoride
Anticorrosive pipeline resistant to high temperature and negative pressure
Chemical pipeline
Metal cans Steel-Lined Plastic Square Tank, Electrolytic Tank, Pickling Tank Acid Containment Vessels Custom Made Rotationally Molded Linear Resins LLDPE
Custermizing Checmial Acid Storage Tank 60 m3 Steel Lined LLDPE Tank Used to Contain: HCl (max 35%) , Naoh (max 50%) , Naclo (max 10%) , PAC (max 17%) ,H2so4
Used to contain: HCl (max 35%), NaOH (max 50%), NaCLO (max 10%), PAC (max 17%), H2SO4 etc
Media (density) : (1155 Kg/m3), Hydrochloric Acid (1150 Kg/m3), Sulfate, Nitrate (1152 Kg/m3), Phosphate (1151 Kg/m3), Hydrofluoric Acid (1132 Kg/m3), Battery Fluid (1135 Kg/m3), Chloride (1135 Kg/m3), Ferric Chloride Solution (1130 Kg/m3), Sodium Hypochlorite (1130 Kg/m3), Sulfurous Acid (1030 Kg/m3)
processing/storing; aluminum sulfate, ammonium sulfate, calcium chloride, ethylene glycol, ferric chloride, ferric sulfate, ferrous sulfate, hydrochloric acid, hydrofluoric acid, hydrofluosilicic acid, hydrogen peroxide, magnesium chloride, phosphoric acid, polymers, potassium hydroxide, or just plain water and we'll design the vessel(s) you require.
Horizontal / Vertical Storage HCL Acid Tanks Steel Lined LDPE 120000 Liters
For Storage Bleach, Hydrochloric Acid, Ferric Chloride, Oilfield Chemicals, Corrosive Wastes And Other Hazardous Cargoes.
Steel ( 6 mm -8mm ) Lined PE Plastic 7042 (16mm - 25 mm ) storage tank
| Specification | General PTFE thickness and negative pressure-resistance | The thickness of PTFE wall required to resist-0.1MPA pressure when the temperature is less than 120degree, | |
| DN25 | 2mm | -0.08Mpa | 3mm(L≤3000mm) |
| DN32 | 2mm | -0.075Mpa | 3mm(L≤3000mm) |
| DN40 | 2.5mm | -0.075Mpa | 4mm(L≤3000mm) |
| DN50 | 2.5mm | -0.06Mpa | 5mm(L≤3000mm) |
| DN65 | 2.5mm | -0.05Mpa | 8mm(L≤1000mm) |
| DN80 | 3mm | -0.05Mpa | 10mm(L≤1000mm) |
| DN100 | 3mm | -0.04Mpa | 13mm(L≤1000mm) |
| DN125 | 4mm | -0.03Mpa | 13mm(L≤1000mm) |
| DN150 | 4mm | -0.025Mpa | 13mm(L≤1000mm) |
| DN200 | 5mm | -0.02Mpa | 15mm(L≤1000mm) |
Specifications:
Nominal Diameter (mm/in. ): DN15-DN600 (NPS 1/2-NPS 24)
Operating temperature: -20-180 degree
Operating pressure: -0.09MPa-1.6MPa (-0.9bar-16bar)
Pipe: Seamless steel.
Flange: ASME B16.5 Class 150 Flange options: HG, GB, JB, JIS, BS, DIN, ANSI, ASTM
Special pieces of specific or non standard size can be manufactured on request.
Carbon steel 45/90degree ptfe lined elbow
Operating temperature: -20-180
Operating pressure: -0.09MPa-1.6MPa
Carbon steel 45/90degree ptfe lined elbow
1. Positive pressure: It shall adopt steel components according to different technical requirements, and the thickness of PTFE wall shall be over 2mm. If the temperature is less than 100 degree, the production length shall be less than 6m; And if the temperature exceeds 100 degree, the length shall be less than 3m.
2. Negative pressure: Design according to different ambient conditions of the users
| PTFE lined 90° elbow | Unit mm | ||||||||
| Nominal diameter | Specification of balled iron T | Raised face A | Central height C1 | Inside diameter D1 | PTFE thickness | out side diameter of flange D | Diameter of bolt circle K | Thickness of flange C | |
| DN(mm) | NPS(inch) | ||||||||
| DN15 | 1/2 | 34 | 40 | 80 | 15 | 5 | 90 | 65 | 11 |
| DN20 | 3/4 | 38 | 45 | 90 | 18 | 5 | 100 | 75 | 11 |
| DN25 | 1 | 42 | 60 | 92 | 22 | 5 | 110 | 85 | 12 |
| DN32 | 1 1/4 | 48 | 70 | 100 | 28 | 5 | 130 | 100 | 13 |
| DN40 | 1 1/2 | 57 | 80 | 112 | 38 | 5 | 140 | 110 | 14 |
| DN50 | 2 | 68 | 95 | 117 | 48 | 5 | 155 | 125 | 14 |
| DN65 | 2 1/2 | 89 | 115 | 135 | 63 | 8 | 175 | 145 | 16 |
| DN80 | 3 | 108 | 130 | 150 | 78 | 8 | 190 | 160 | 16 |
| DN100 | 4 | 114 | 150 | 150 | 87 | 8 | 210 | 180 | 18 |
| DN125 | 5 | 140 | 180 | 190 | 110 | 8 | 240 | 210 | 20 |
| DN150 | 6 | 168 | 205 | 230 | 135 | 10 | 275 | 240 | 20 |
| DN200 | 8 | 219 | 260 | 305 | 180 | 10 | 330 | 295 | 20 |
| DN250 | 10 | 273 | 315 | 380 | 230 | 12 | 385 | 350 | 23 |
| DN300 | 12 | 325 | 365 | 420 | 280 | 12 | 435 | 400 | 23 |
1.Are you trading company or manufacturer ?
We are Group Corporation manufacturer ,have Group Factories Contractor.Don't worry,dear.We have joined the trade assurance,if the products have quality problems when you received them,the payments can be refund to you.
Key words:
| ptfe lined pipe fittings | ptfe lined tee | ptfe lined reducer | ptfe lined elbow | ptfe lined cross |
| ptfe lined pipe and fittings | ptfe lined90degree elbow | ptfe lined 45 degrdd elbow | ptfe lined ECC reducer | ptfe lined CON reducer |
| ptfe lined equal tee | ptfe lined reduce tee | ptfe lined unequal tee | ptfe lined pipe | ptfe lined fittings |
| ptfe lined carbon steel pipe fittings | ptfe lined carbon steel tee | ptfe lined carbon steel reducer | ptfe lined carbon steel elbow | ptfe lined carbon steel cross |
| PTFE pipe | PTFE lined pipe(Australia) | Resistant Stainless Steel Pipe | Resistant Steel Pipe | Carbon seamless steel pipe |
| Anti Corrosion Pipe Fittings Lined | PTFE lining fittings | PTFE lined piping | straight tee | PTFE lined bends |
Customizing LLDPE PTFE Lined F46 Steel Pipe with Chemical Discharge Valves
Anticorrosive Steel Lined Plastic PTFE ,LLDPE Pipe Use for Sulfuric Acid Hydrochloric Acid HCL, NaOH, NaCLO,
Steel lined piping with tetrafluoride
Molded piping with tetrafluoride
Anticorrosive pipeline resistant to high temperature and negative pressure
Chemical pipeline
Metal cans Steel-Lined Plastic Square Tank, Electrolytic Tank, Pickling Tank Acid Containment Vessels Custom Made Rotationally Molded Linear Resins LLDPE
Custermizing Checmial Acid Storage Tank 60 m3 Steel Lined LLDPE Tank Used to Contain: HCl (max 35%) , Naoh (max 50%) , Naclo (max 10%) , PAC (max 17%) ,H2so4
Used to contain: HCl (max 35%), NaOH (max 50%), NaCLO (max 10%), PAC (max 17%), H2SO4 etc
Media (density) : (1155 Kg/m3), Hydrochloric Acid (1150 Kg/m3), Sulfate, Nitrate (1152 Kg/m3), Phosphate (1151 Kg/m3), Hydrofluoric Acid (1132 Kg/m3), Battery Fluid (1135 Kg/m3), Chloride (1135 Kg/m3), Ferric Chloride Solution (1130 Kg/m3), Sodium Hypochlorite (1130 Kg/m3), Sulfurous Acid (1030 Kg/m3)
processing/storing; aluminum sulfate, ammonium sulfate, calcium chloride, ethylene glycol, ferric chloride, ferric sulfate, ferrous sulfate, hydrochloric acid, hydrofluoric acid, hydrofluosilicic acid, hydrogen peroxide, magnesium chloride, phosphoric acid, polymers, potassium hydroxide, or just plain water and we'll design the vessel(s) you require.
Horizontal / Vertical Storage HCL Acid Tanks Steel Lined LDPE 120000 Liters
For Storage Bleach, Hydrochloric Acid, Ferric Chloride, Oilfield Chemicals, Corrosive Wastes And Other Hazardous Cargoes.
Steel ( 6 mm -8mm ) Lined PE Plastic 7042 (16mm - 25 mm ) storage tank
| Specification | General PTFE thickness and negative pressure-resistance | The thickness of PTFE wall required to resist-0.1MPA pressure when the temperature is less than 120degree, | |
| DN25 | 2mm | -0.08Mpa | 3mm(L≤3000mm) |
| DN32 | 2mm | -0.075Mpa | 3mm(L≤3000mm) |
| DN40 | 2.5mm | -0.075Mpa | 4mm(L≤3000mm) |
| DN50 | 2.5mm | -0.06Mpa | 5mm(L≤3000mm) |
| DN65 | 2.5mm | -0.05Mpa | 8mm(L≤1000mm) |
| DN80 | 3mm | -0.05Mpa | 10mm(L≤1000mm) |
| DN100 | 3mm | -0.04Mpa | 13mm(L≤1000mm) |
| DN125 | 4mm | -0.03Mpa | 13mm(L≤1000mm) |
| DN150 | 4mm | -0.025Mpa | 13mm(L≤1000mm) |
| DN200 | 5mm | -0.02Mpa | 15mm(L≤1000mm) |
Specifications:
Nominal Diameter (mm/in. ): DN15-DN600 (NPS 1/2-NPS 24)
Operating temperature: -20-180 degree
Operating pressure: -0.09MPa-1.6MPa (-0.9bar-16bar)
Pipe: Seamless steel.
Flange: ASME B16.5 Class 150 Flange options: HG, GB, JB, JIS, BS, DIN, ANSI, ASTM
Special pieces of specific or non standard size can be manufactured on request.
Carbon steel 45/90degree ptfe lined elbow
Operating temperature: -20-180
Operating pressure: -0.09MPa-1.6MPa
Carbon steel 45/90degree ptfe lined elbow
1. Positive pressure: It shall adopt steel components according to different technical requirements, and the thickness of PTFE wall shall be over 2mm. If the temperature is less than 100 degree, the production length shall be less than 6m; And if the temperature exceeds 100 degree, the length shall be less than 3m.
2. Negative pressure: Design according to different ambient conditions of the users
| PTFE lined 90° elbow | Unit mm | ||||||||
| Nominal diameter | Specification of balled iron T | Raised face A | Central height C1 | Inside diameter D1 | PTFE thickness | out side diameter of flange D | Diameter of bolt circle K | Thickness of flange C | |
| DN(mm) | NPS(inch) | ||||||||
| DN15 | 1/2 | 34 | 40 | 80 | 15 | 5 | 90 | 65 | 11 |
| DN20 | 3/4 | 38 | 45 | 90 | 18 | 5 | 100 | 75 | 11 |
| DN25 | 1 | 42 | 60 | 92 | 22 | 5 | 110 | 85 | 12 |
| DN32 | 1 1/4 | 48 | 70 | 100 | 28 | 5 | 130 | 100 | 13 |
| DN40 | 1 1/2 | 57 | 80 | 112 | 38 | 5 | 140 | 110 | 14 |
| DN50 | 2 | 68 | 95 | 117 | 48 | 5 | 155 | 125 | 14 |
| DN65 | 2 1/2 | 89 | 115 | 135 | 63 | 8 | 175 | 145 | 16 |
| DN80 | 3 | 108 | 130 | 150 | 78 | 8 | 190 | 160 | 16 |
| DN100 | 4 | 114 | 150 | 150 | 87 | 8 | 210 | 180 | 18 |
| DN125 | 5 | 140 | 180 | 190 | 110 | 8 | 240 | 210 | 20 |
| DN150 | 6 | 168 | 205 | 230 | 135 | 10 | 275 | 240 | 20 |
| DN200 | 8 | 219 | 260 | 305 | 180 | 10 | 330 | 295 | 20 |
| DN250 | 10 | 273 | 315 | 380 | 230 | 12 | 385 | 350 | 23 |
| DN300 | 12 | 325 | 365 | 420 | 280 | 12 | 435 | 400 | 23 |
1.Are you trading company or manufacturer ?
We are Group Corporation manufacturer ,have Group Factories Contractor.Don't worry,dear.We have joined the trade assurance,if the products have quality problems when you received them,the payments can be refund to you.
Key words:
| ptfe lined pipe fittings | ptfe lined tee | ptfe lined reducer | ptfe lined elbow | ptfe lined cross |
| ptfe lined pipe and fittings | ptfe lined90degree elbow | ptfe lined 45 degrdd elbow | ptfe lined ECC reducer | ptfe lined CON reducer |
| ptfe lined equal tee | ptfe lined reduce tee | ptfe lined unequal tee | ptfe lined pipe | ptfe lined fittings |
| ptfe lined carbon steel pipe fittings | ptfe lined carbon steel tee | ptfe lined carbon steel reducer | ptfe lined carbon steel elbow | ptfe lined carbon steel cross |
| PTFE pipe | PTFE lined pipe(Australia) | Resistant Stainless Steel Pipe | Resistant Steel Pipe | Carbon seamless steel pipe |
| Anti Corrosion Pipe Fittings Lined | PTFE lining fittings | PTFE lined piping | straight tee | PTFE lined bends |
